Operating Manual
4
1300-87076-1A Rev. 1
1.0 Safety Precautions
Before using the Spex NanoSNAP microvolume spectrophotometer for the first time, please read this entire
Operating Manual carefully. To guarantee problem-free, safe operation of the Spex NanoSNAP, it is essential to
observe the following section.
1.1 Intended Use
This instrument is intended to be used by trained personnel to perform solution analysis. In this manual we
assume that the user have knowledge of basic laboratory procedures and spectroscopic analysis.
1.2 General Instrument Safety
PHYSICAL INJURY HAZARD.
Using the instrument in a manner not specified by Spex may result in
personal injury or damage to the instrument.
1.2.1 Transportation and Storage
This instrument should be transported and stored in an environment with a temperature of -10 ºC to 60 ºC,
relative humidity 20% to 80%.
1.2.2 Installation and Operation
1. Indoor use only
2. Do not use the device in a potentially explosive environment or with potentially explosive chemicals or
combustible substances.
3. Maximum altitude 2000 m
4. Pollution degree 2
5. Ensure enough free space around unit for adequate ventilation
6. Avoid placing the device in direct sunlight.
7. Install the device in a location free of excessive dust.
8. Install the device in a room with a temperature of 15 ºC to 30 ºC, relative humidity 20% to 80%.
9. Do not position the device so that it is difficult to disconnect from the mains supply using the mains plug.
10. Choose a flat, stable surface capable of bearing the weight of the device.
11. Do not allow water or any foreign objects to enter the various openings of the device.
