15
Setting Real-Time Start Mode
This option is used with the datalogger connected to the
computer, through the USB port.
Note…
The meter may not be disconnected from the computer
during real-time sampling.
1. Adjust the ▲ or ▼ indicators to specify the number
of sample points, in thousands, from 1000 to 32,000.
2. Adjust the ▲ or ▼ indicators to toggle between
units: °C or °F.
3. Select “Ok” to save the settings and exit the menu,
or “Cancel” to exit without saving the new settings.
Setting Key Start Mode
This option allows you to take readings without having the
datalogger connected to a computer. Measurement will
not begin until the grey button is pressed.
1. Adjust the ▲ or ▼ indicators to specify the number
of sample points, in thousands, from 1000 to 32,000.
2. Adjust the ▲ or ▼ indicators to toggle between
units: °C or °F.
3. Select “Ok” to save the settings and exit the menu,
or “Cancel” to exit without saving the new settings.
