20
DOWNLOADING DATA
1. If the datalogger is not currently connected to the
computer, insert the USB drive into the USB port.
2. Click the “LOGGER Status” button to stop recording.
The datalogger ID, number of records sampled, and
the sampling parameters and rate will display.
Save data:
Press SAVE button to save txt.file.
View Data Table
:
Press View button to get data table with details.(pic.6)
(pic.6)
Print graph:
Press PRINT button and print graph. Follow the print setting below to print full
screen graph. Press OK to print pdf file.(pic.7)
Print Table Data:
Press table data, the screen shows the record range, enter the start number
to the end number (For example: 1~500 or 200~1000...or leave it blank for
printing all data ).(pic.8)
Save each pdf. files with different names.
(pic.7)
√
√
(pic.8)
P7
Retrieve file:
Press RETRIEVE FILE button to select file and
show the graph.
Roll-over mode:
Select the mode to record when the data is full, it will cover the earliest memory.
After download the data , long press grey
button to record without reset up each
parameter and selection.
LOGGER Status:
Before download data, press
to show ID, Records, Sample rate,
LOGGER status
Unit.
NOTE: Once
button is pressed, recording is inactivated.
Download
Logger function:
Download data:
Press DOWNLOAD button, data download in few seconds. Graph shows
automatically
NOTE:
Please do not press DOWNLOAD button if you won’t stop record.
You can press LOGGER STATUS button to see record points.
3. Click the “Download” button to download the data.
A graph of the data will appear after the data has
finished downloading.
Viewing the Graph
Note…
To display specific values for any data point, use the
mouse to move the red cursor (located on the red vertical
line) to the desired point on the graph.
•
To zoom in
: Hold
CTRL
and click the left mouse button.
•
To zoom out
: Hold
CTRL
and click the right mouse button.
•
To move the graph
: Hold
CTRL
and Shift and then
click and hold the left mouse button. Use the cursor to
move the graph.
