18
Sampling and Recording in Real-Time Mode
1. Recording will begin automatically as soon as the setting is
confirmed. A green indicator at the lower left of the screen
will flash and the readings will appear on the display.
2. Press “Stop” to finish recording.
3. Click the “Save” button (floppy disc icon) to save the data.
4. Enter a unique name for the file.
5. Select “OK” to confirm. “Save file completed” displays.
Real-time start mode:
Key-start mode:
Press
NOTE:
The button is designed for not easy to touch , users have to use a sharp pin to touch
(If you set up start mode as “BUTTON”) ,to prevent carelessly touch to start or stop
the recording.
After set up “key start” as start mode, remove the logger from USB port.
Use a sharp pin to push the middle of gray button, until you hear a “ click sound “,
the LED will flash to start recording.
1. Select start mode at “Key-start”, remove datalogger from pc.
2. Use a sharp pin to touch the grey button, start logging.
3. Datalogger stop recording after memory is full.
Schedule start mode:
Select the date and time meter will start recording.
Please follow the date and time form (M/D/Y,H:M:S)
SETTING:(Pic.5)
1
:
Set sample point (K=1,000 multiple basis within total
memory points)
2.Set sample rate, start mode to record:
Select
“second(0~59)” time interval.
“hour(1~6), “minute(0~59)”,
Select 5 start modes from:
Immediately
Schedule
Real-time (PC is always connected with the logger unit)
Key start (Start recording by pressing button)
(when memory are full, logger covers the
Roll-over
earliest memory automatically)
3.Select Unit :
Select Temperature unit °C/°F,press
OK to confirm.
(Pic.5)
2.In real-time mode, it shows “STOP” button instead of “DOWNLOAD”
at the right corner. Press “STOP” to stop real-time recording. Then button will
change into “DOWNLOAD”. Press “DOWNLOAD”for downloading data.
►Before exit software data has to be downloaded
1.After set start mode at real-time,datalogger starts login records. When logger
records, the green fan at left corner shows it is under recording.(Meter should
be connected with pc all the time,under this mode.)
STOP
Sampling and Recording in Key Start Mode
1. Remove the datalogger from the computer.
2. Press the grey button to begin logging data. You will hear
a click when the button is pressed and the green LED will
flash to indicate that the logger is recording data.
Note…
The grey on/off button requires a firm touch. This ensures
that it will not accidently stop (or start) recording.
3. The datalogger will record up to 32,000 data points.
Once the memory is full, recording will stop.
