Center
Center
Passenger Side
Driver Side
11
SpeedTech Lights, Inc © 2019
RAPTOR
®
-X
VISOR LIGHT BAR
Q-302 / Q-304 Visor Bracket Assembly
NOTE: These Vehicle Specific Visor brackets do not require a base bracket assembly. These brackets attach
directly to the mounting holes on the Raptor Light Bar base.
For this example, the Q-304 Vehicle Specific Brackets will be used.
NOTE: Hardware quantity used will vary based on single or double mounting holes.
1. Take (1) Driver Side Vehicle Specific visor bracket and
mount to light bar directly to the Driver side outter most
hole.
NOTE: Do not fully tighten at this point as adjusting
will need to be done.
2. Repeat Step 1 for the Passenger Side Vehicle
Specific visor bracket.
3. Repeat Step 1 for the (2) Center Vehicle Specific visor
brackets.
