Center
Center
Passenger Side
Driver Side
Base
9
SpeedTech Lights, Inc © 2019
RAPTOR
®
-X
VISOR LIGHT BAR
Base Bracket and Q-300 / Q-303 / Q-305 / Q-306 Visor Bracket Assembly
NOTE: This assembly is very similar to the Universal Bracket assembly. The only difference is the Vehicle
Specific visor brackets will be used instead of the Universal forked visor brackets to pair with the base brackets.
For this example, the Q-303 Vehicle Specific Brackets will be used.
NOTE: Hardware quantity used will vary based on single or double mounting holes.
1. Take (1) base bracket and the Driver Side Vehicle
Specific visor bracket and overlap the openings. Insert
(1) Phillips pan head screw and (1) flat washer through
visor bracket opening. On the other end, insert (1) flat
washer and (1) hex lock nut to secure both brackets
together.
NOTE: Do not fully tighten at this point as adjusting
will need to be done.
2. Repeat Step 1 for the Passenger Side Vehicle
Specific visor bracket and the (2) Center Vehicle Specific
visor brackets. There will be a total of (4) assemblies.
