8
SpeedTech Lights, Inc © 2019
RAPTOR
®
-X
VISOR LIGHT BAR
Attaching Assembly to Raptor Light Bar Base
There are (4) holes on the bottom of each Raptor segment, (8) holes total.
NOTE: Some assemblies and brackets only require
(1) hole to be used for mounting. Choose the hole
that will allow best fitment to the vehicle.
1. Attach each assembly using the appropriate selected
mounting hole, via the base bracket, using (1) Phillips
pan head screw. Hand tighten only at this point.
2. With all the assemblies now in place, adjust each
visor bracket and base bracket to fit the vehicle. The
flashback guard with the rubber stripping applied should
be contacting the windshield. If the flashback guard
is not touching the windshield you will need to use
the other hole on the bottom of the Raptor and/or you
will need to include spacers (see Page 10 for Spacer
Installation).
3. Once the exact positioning of the brackets is
determined, remove each assembly from the Raptor
base to fully tighten the visor bracket and base bracket
together. Reattach each assembly back to the Raptor
base (as in Step 1).
