B-339VW01_R3_ENG
Revision 3
2
Dear customer,
thank you for your confidence in our products! This installation guide was created with utmost care and is regularly
revised. We cannot garantuee that this document is complete and free of errors or mistakes.
If you find any errors or have any difficulties, please let us know.
Thanks a lot!
Your speedsignal support team
Contents
Contents .......................................................................................................................................................................... 2
Safety Instructions ........................................................................................................................................................... 2
Description ...................................................................................................................................................................... 2
Scope of Delivery: Required tools: ............................................................................................................................... 2
Tap Points ........................................................................................................................................................................ 3
additional cables ............................................................................................................................................................. 3
Installation Guide ............................................................................................................................................................ 3
Tap Point A – ignition lock ............................................................................................................................................... 3
Tap Point A ...................................................................................................................................................................... 4
Tap Point B – CAN Bus ..................................................................................................................................................... 4
Pin Assignment ................................................................................................................................................................ 5
Installation of the RunLock button 6003131 ................................................................................................................... 5
Functional test ................................................................................................................................................................. 6
Warranty conditions: ...................................................................................................................................................... 6
Service: ............................................................................................................................................................................ 7
Safety Instructions
The installation of this product should only be carried out by trained specialist personnel and in accordance with this
manual.
speedsignal GmbH cannot accept any liability for injury to persons or damage to property from errors or mistakes in
this operating manual.
Please disconnect the battery before you start with the installation. During montage all additional supply lines
must be secured pursuant to their cross section and cable length. (DIN VDE 0298-4)
Description
RunLock is an electrical circuit for vehicles, which enables you to remove the ignition key without switching of the
engine. According to vehicle type and equipment you can even lock the doors without interrupting the engine run.
Primarily it is intended for the use within authority vehicles in exercise of their duties.
For the installation into other vehicles (not authority) we point out that an unnecessary engine run is for-
bidden by law in many countries such as in Germany according to StVO §30.
Scope of Delivery:
Required tools:
8
interface
main wiring
additional
RunLock-
Torx-
extraction
drill
soldering iron
cables
button
screwdriver
tool
3470073
C-3470078
6003131
TX 20
Ø 12mm
