CHAPTER 6. DEVICE OPERATION
6.3
LCD panel
Gnome-2M
c
LCD panel is shown in Fig. 6.1. It consists of an operating area (97
×
32 dots) and
a string of digits and mnemonic symbols located at the bottom of the screen. By default, the screen
operating area (it is marked by a dotted line in Fig. 6.2) is used to display current voice recorder
parameters. Digits and mnemonic symbols show the number of the recordings at the memory card
and current batteries’ state of charge.
Figure 6.2: LCD panel
LCD symbols and messages are listed and explained in Table 6.2.
Table 6.2: Graphic symbols
Graphic Symbol
Function
User Identification
ENTER PIN
PIN-code query
LCD Operating Area
REC
Sound record is on
USB connected
Voice recorder is connected to the PC
–34. . . +12 dB
Current input gain level
25May 13:24:17
Current date and time
Automatically switch LCD panel off during record
Loop mode is active
Protect key is active
Record by timers mode is active
Voice activation mode is active
14
