Chapter 8
Gnome-2M
c
software
8.1
Gnome-2M
c
software kit and its functions
The software kit delivered with the voice recorder includes drivers for the Compact Flash disk drive,
Sound Manager STC-S203
application and Gnome-2M
c
device drivers.
The
Sound Manager
software is necessary to:
•
set and change PIN-code
•
set and change recorded signal masking algorithm
•
view existing records’ parameters and play them via PC
•
remove signal masking and save existing records on PC hard drive or other media
8.2
Software installation and system requirements
System requirements for Gnome-2M
c
are:
•
PC with a free USB port;
•
MS Windows 2000/XP;
•
Any common Windows application capable of playing *.wav files (e.g., Windows Media
Player);
•
Enough free space on the hard drive for audio files storage;
You may copy or read records stored on the CF card via the voice recorder or a CF card reader.
In the latter case you will have to install its device drivers supplied on the CD.
If you connect Gnome-2M
c
to a PC and do not install voice recorder device drivers, it will be
detected by your MS Windows system as an external CF disk drive. If you plan to use Gnome-
2M
c
as an external sound device (instead of a common Sound Blaster), you will have to install
its drivers. These drivers are to be found on the “Sound Manager” CD. Just follow the software
installation wizard instructions. After the drivers are installed, you can select Gnome-2M
c
as your
sound recording ans playback device on the control panel.
After the necessary drivers are installed, you should install the
Sound Manager
software. To do
it run the setup.exe file on the respective CD and follow the instructions of the wizard.
28