Spectur Guide for STA6 Installation
1300 802 960 | www.spectur.com.au
13
Step 2:
Slide the tilt pole onto the bracket and line
up the tilt pole bracket hole with the
respective hole in the pole. Ensure that the
battery box is on the side where you want
the camera to be viewing.
Insert an M15x235 bolt to attach the
bracket and the pole, then secure it on the
other side with a nut. It should be firm, but
still allow for the tilt pole to move freely.
Step 3:
Attach the winch to the bottom pole using 2 M6x235
bolts and 2 M6 nuts as shown below. Once the winch
has been secured set the switch at the bottom of the
winch to the middle setting, this will allow for the line to
be extended and attached to the bottom of the tilt pole.
Once the winch is attached to the bottom of the tilt
pole, wind the winch to provide moderate tension.
Commented [GP5]:
How tight/loose should this be to
allow movement?
