Spectur Guide for STA6 Installation
1300 802 960 | www.spectur.com.au
14
Step 4:
Slide the STA6 system over the tilting pole and
secure with an M10x140 bolt, with an M10 washer
then an M10 spring washer, followed by an M10 nut
on the other side of the pole. This should be firmly
tightened.
Take care when attaching the STA6 system that the
camera is pointing straight up, otherwise when the
system is winched up it will not be pointing straight
ahead.
Step 5:
Attach the white power cable to the system
and the other end to the pole. To secure the
cable, plug it in then twist to tighten. With the
completion of this step move to the section
on attaching the panel.
