manualshive.com logo in svg

Spectrum fieldscout TDR 300, Product Manual, Page: 8 / 32

Share
Download
Spectrum fieldscout TDR 300 Product Manual Download Page 8

8 

 

MODE 

Pressing the MODE button allows the 
user to determine the type of measure-
ment that will be taken or select the 
length of rods connected to the probe.   
 

Data Collection Modes 
Available measurement options are volumetric water con-
tent (VWC) using the standard or high clay mode (see p. 
22), up to two relative water content modes (see p. 24), or 
measurement period (in microseconds).  Relative water 
content options will only appear if they are configured in 
the software (see Meter Settings, p. 16).  The period meas-
urement is available for users interested in performing 
soil-specific calibrations (see Appendix 2). 
 
Note: There is not a high clay measurement calibration for 
the 1.5” rods.  The meter will display dashes if this mode/
rod length combination is selected. 
 
Changing Rod Length 
 
 
 
 
 
 
 
In order to get accurate volumetric or relative water con-
tent (VWC or RWC) readings, the rod length setting must 
be correct.  In the VWC modes, the currently selected rod 
length appears in the lower left corner of the LCD screen.  
The options are 

T

urf (1.5”), 

S

hort (3.0”), 

M

edium (4.7”), 

and 

L

ong (7.9”) rods.  Press the MODE  button until the 

LCD displays the rod length options screen.  Pressing the 
DELETE/CLR AVG button will allow you to toggle be-
tween the three choices. 

 

MODE 

 

ROD=MED  (4.7in) 
HIT DEL To Chnge  

Rod Length Options Screen 

Summary of Contents for fieldscout TDR 300

































Reviews:

No comments