Spectrum fieldscout TDR 300 Product Manual Download Page 3 | Manualshive

Page: 3 / 32

Spectrum fieldscout TDR 300 Product Manual Download Page 3

3

Thank you for purchasing the Field Scout

TM

TDR 300

Soil Moisture Meter. This manual describes the fea-
tures and operation of the meter.

Soil moisture is a critical and potentially highly vari-
able component of the soil environment. Time-domain
reflectometry is a proven technology for quickly and
accurately determining volumetric water content
(VWC) in soil.

The Field Scout’s shaft-mounted probe allows the user
to easily and rapidly take many measurements. The
user can quickly transition between taking VWC read-
ings in standard and high-clay mode. The meter’s
built-in data logger can record data from several sites
and eliminates the need to record data manually.
Through the software (included) the user can download
the data, change the logger settings and program the
logger to record relative water content at multiple sites.

Contents

Your TDR300 shipment includes the following compo-
nents:
- TDR 300 meter (in retracted position)
- Carrying case
- Wrench for tightening rods
- 4 AAA batteries
- Field Scout software installation CD
- Gray PC interface cable

Note: TDR rods are sold separately

General overview

«
1
2
3
4
5
...
»

Summary of Contents for fieldscout TDR 300

































Reviews:

No comments