Spectrum DataScout 3920, Product Manual

Page: 13 / 24

13
WiFi: If the DataScout can
connect to the SpecConnect
servers, the LED will light
Green. Amber indicates that it
is connected to WiFi but can-
not reach the servers (internet
service to access point may
be down). If there is no con-
nection at all to your local
WiFi network, the LED will
light Red.
WiFi Provisioning: For the DataScout WiFi modems (items 3920
and 3920S), there is one additional button function: WiFi Provi-
sioning. Press and hold the button until the light turns out
(approximately 8 seconds) to initiate the provisioning sequence
to setup the DataScout with the desired WiFi Access point. See
p. 10 for details on WiFi provisioning.
Radio Activity
In addition to responding to button presses, the LED will intermit-
tently flash to indicate data activity. It will flash green when it
receives data from the network or the attached Station/Retriever.
It will flash amber when transmitting data. If the LED flashes red,
it is an indication of a problem with reception and/or transmission
of data to/from the network/servers. See
“ Troubleshooting ” (p.
19) for more details.
Note: The no - button flash sequences occur automatically and
may possibly overlap with other LED activity.
Figure 2. WiFi DataScout
reference label