Spectrum Controls Micro800 2085sc-IF16C, User Manual, Page: 39 / 60

Chapter 3: Configuring the 2085sc-IF16 Using CCW 3-13
User’s Manual Pub. 0300306-02 Rev. B
Section 3.5
Software Information
3.5.1 Software Versioning
The software version tracks major and minor revisions for end users.
The shipped software version begins at version 1.1.
Once released, the major revision is typically incremented if new features are
introduced to the product. Otherwise only the minor revision is incremented.
3.5.2 Software Updates
In-field updating of the software by the end user is not supported.
3.5.3 Startup and Factory Default Conditions
After the module boots and before the initial configuration is received, the
modules run with default configurations as specified in the Configuration
Assembly.
• The default configuration for the IF16C is for all channels enabled in the 4-
20 mA range with the 17 Hz filter in Engineering ×1 units.
• The default configuration for the IF16V is for all channels enabled in the ±10
V range with the 17 Hz filter in Engineering ×1 units.
Module Identity
The following values will be stored in the Vendor ID, Product_Type,
Product_Code, Series_Rev, and Mod_Features arrays:
Parameter 2085sc-IF16C 2085sc-IF16V
Vendor ID 58 (Spectrum Controls) 58 (Spectrum Controls)
Product Type 10 (Analog) ) [0×0A] 10 (Analog) ) [0×0A]
Product Code 112 [0×70] 111 [0×06F]
Series Rev (1.1) 0×C420
50208 (First release revision is
1.1)
Series Rev (2.1)
0×C440
50240 (Second release revision
is 2.1)
Module Catalog String 2085sc-IF16C 2085sc-IF16V
3.5.4 Connection Types and Assembly Sizes
The size of each assembly is listed in the table below. Each word is 2 bytes.
These values are stored in the Mod_Size array:
Table Size (words)
Configuration Assembly 48
Input Assembly 25
Output Assembly 5
3.5.5 Configuration Assembly
The Configuration Assembly table (Mod_Config array) is organized as follows: