Chapter 1: Module Overview
1-7
User’s Manual Pub. 0300306-02 Rev. B
operation are provided below.
A 2085sc-IF16 module with Version 1.1 firmware uses a single, green
OK
LED
to show power or module operational status.
When startup is completed, and all internal tests have passed, the LED is solid
GREEN. If the LED remains off, there is an error with the module: it may not
have power, or the module failed to pass the self-test.
Table 1-4 LED Blink Codes Table for Firmware 1.1
Indicator
State
Description
Module OK
LED Status
Off
No power applied to device or the module may have
failed to pass its self-test.
Solid
Green
RUN mode. Module has power and passed self-test.
No action is required.
Blinking
Green
LED blink status:
1. Internal use only.
2. Internal use only.
3: Internal use only.
4: Internal use only.
5: Indicates ADC communication error.
6: Indicates Watchdog reset.
A 2085sc-IF16 module with Version 2.1 firmware uses a single, green
OK
LED
to show power or module operational status:
•
When startup is completed, and all internal tests have passed, the LED is
solid GREEN. This indicates RUN mode.
•
If the LED remains off, there is an error with the module: it may not have
power or failed to pass the self-test.
•
Any time the system is not in Run mode (and showing no faults), the
LED blinks rapidly, indicating the module is Offline. All inputs and
outputs are disabled in this instance.
The LED identifies different conditions using specific, numeric, blink patterns.
The module blinks a specific number of times, pauses, and then repeats the same
blink pattern indefinitely. Blink codes are shown in the following table.
Summary of Contents for Micro800 2085sc-IF16C
Page 1: ...User s Manual Pub 0300306 02 Rev B...
Page 8: ...vi Micro800TM 16 Channel Analog Input Module User s Manual Pub 0300306 02 Rev B...
Page 18: ...1 10 Chapter 1 Module Overview User s Manual Pub 0300306 02 Rev B...
Page 54: ...3 28 Chapter 3 Configuring the 2085sc IF16 Using CCW User s Manual Pub 0300306 02 Rev B...