Spectrum Controls 1746sc-INI4i, User Manual

Page: 6 / 56

vi SLC 500™ Isolated Analog Input Modules
User’s Manual Pub. 0300128-04 Rev. A
Refer to this Document
Allen-Bradley
Pub. No.
Allen-Bradley Advanced Programming
Software (APS) Reference Manual
1747-6.11
Getting Started Guide for Advanced
Programming Software (APS)
1747-6.3
SLC 500 Software Programmers’ Quick
Reference
ABT-1747-TSG001
Guide
Allen-Bradley HHT (Hand-Held
Terminal) User Manual
1747-NP002
Getting Started Guide for HHT (Hand-
Held Terminal)
1747-NM009
Allen-Bradley Publication Index SD499
Allen-Bradley Industrial Automation
Glossary
AG-7.1
Technical
Support
For technical support, please contact your local Rockwell Automation
TechConnect Office for all Spectrum products. Contact numbers are as follows:
• USA 1-440-646-6900
• United Kingdom 01-908-635-230
•
Australia 1-800-809-929
•
Mexico 001-888-365-8677
•
Brazil 55-11-3618-8800
• Europe +49-211- 41553-630
or send an email to support@spectrumcontrols.com
Documentation
If you would like a manual, you can download a free electronic version from the
Internet at www.spectrumcontrols.com
Conventions
Used in This
Manual
The following conventions are used throughout this manual:
• Bulleted lists (like this one) provide information, not procedural steps.
• Lists provide sequential steps or hierarchical information.
• Italic
type is used for emphasis.
•
Bold type identifies headings and sub-headings:
WARNING
Identifies information about practices or circumstances that can lead to
personal injury or death, property damage, or economic loss. These
messages help you to identify a hazard, avoid a hazard, and recognize the
consequences.