Chapter 1
Getting Started
Airnet II Particle Sensor Operations Manual
Page 1-3
Class I Laser Product
The Airnet II particle sensors are Class 1 laser products.
Airnet II 510XR and 510s XR
The variant optical block components of the Airnet II 510XR and 510s XR particle
sensors are coated with a special Teflon
®
lining that allows them to withstand
environments that standard particle sensors cannot.
These environments are non-condensing and potentially corrosive or oxidizing to
other standard model Airnet or Airnet II particle sensors. Tests performed at the
Boulder factory allow Particle Measuring Systems to define environments where you
can use the Airnet II 510XR and 510s XR particle sensors.
WARNING
This instrument is a Class 1 laser product.
a
Use of controls, adjustments, or
performance of procedures other than those specified here may result in
hazardous radiation exposure.
a. National Center for Device and Radiological Health (formerly BRH).
CAUTION
When using the Airnet II 510XR or 510s XR particle sensors, it is important to
verify with Particle Measuring Systems that the unit can be used safely under
specific site conditions. Failure to verify this shall automatically void the
warranty.
