
SS1000 Operator’s Manual
A
–
0
1
-
9
2
-
4
A
.
v
e
r
9
7
0
2
0
-
0
0
0
9
4
8
Checking the Fuses
The main fuse is located on the back panel of the analyzer, as shown in Figure
B–1. An additional fuse is located on the DC to DC converter board inside the
housing, as shown in Figure B–2. If you need to replace a fuse, use only the
same type and rating of fuse as the original as listed in Table A–1.
Service Contact
If the troubleshooting solutions do not resolve the problem, contact your sales
representative. If returning the unit is required, obtain a
Return Materials
Authorization (RMA) Number
from your sales representative before
returning the analyzer to the factory. Your sales representative can determine
whether the analyzer can be serviced on-site or should be returned to the
factory.
Disclaimers
SpectraSensors accepts no responsibility for consequential damages arising
from the use of this equipment. Liability is limited to replacement and/or repair
of defective components.
This manual contains information protected by copyright. No part of this guide
may be photocopied or reproduced in any form without prior written consent
from SpectraSensors.
Warranty
The manufacturer warrants the items delivered shall be free from defects
(latent and patent) in material and workmanship for a period of one year after
delivery to the Buyer. The Buyer’s sole and exclusive remedy under this
warranty shall be limited to repair or replacement. Defective goods must be
returned to the manufacturer and/or its distributor for valid warranty claims.
This warranty shall become inapplicable in instances where the items have
been misused or otherwise subjected to negligence by the Buyer.
Notwithstanding any other provision of this contract, no other warranties,
whether statutory or arising by operation of law, expressed or implied,
including but not limited to those of merchantability or fitness for particular
Table A–1
Fuse specifications (refer to Figure B–1 or Figure B–2).
DWG Ref.
Description
Rating
F1
Miniature Fuse, 5 x 20 mm, Time Delay
250VAC/3.00A
F2
Miniature Fuse, 5 x 20 mm, Time Delay
250VAC/3.15A
UK Distibution by IMA Ltd
Tel: +44 (0)1943 878877 Email: [email protected] Web: www.ima.co.uk