SpectraLink DECT Server 8000, Installation Manual

Page: 26 / 42

Spectralink DECT Server 8000 Installation Guide
14184630 Version 8.0, K016
September, 2015
24
8
To reduce the risk of electrical shock or burns, do not disassemble this product. Opening or
removing covers may expose you to dangerous voltages, dangerous electrical current, or
other risks. Incorrect reassemble can cause electrical shock when the appliance is
subsequently used. If the product need repair, consult your dealer.
9
This product does not support connections to outside plant.
10
Refer servicing to qualified service personnel under the following conditions:
—
If liquid has been spilled into the product
—
If the product has been exposed to rain or water
—
If the product does not operate normally when following the operating instructions in the
manual. Adjust only those controls that are covered by the operation instructions. Improper
adjustment of other controls may result in damage and will often require extensive work by
qualified service personnel to restore the product to normal operation.
—
If the product has been dropped or cabinet has been damaged
—
If the product exhibits a distinct change in performance
Warning
1
Avoid using telephone during an electrical storm. There may be a risk of electrical shock from
lightning
2
Do not use the telephone to report a gas leak in the vicinity of the leak
3
Do not place the unit near microwave ovens, radio equipment, or non-ground connected
televisions. These appliances may cause electrical interference to the base or handset
4
Installation must be performed in accordance with all relevant national wiring rules
5
Plug acts as Disconnect Device - The socket outlet to which this apparatus is connected must
be installed near the equipment and must always be readily accessible
6
The system will not operate in the event of a blackout. Please keep a backup phone for
emergencies
Intrinsic safety
Do not install the unit in conditions where there is a danger of electrically ignited explosions.
Exposure to sunlight, heat and moisture
Do not expose the unit to direct sunlight for long periods. Keep away from excessive heat and
moisture.
Spare parts and accessories
Use only approved spare parts and accessories. The operation of non-approved parts cannot be
guaranteed and may even cause damage.