Spectralink DECT Server 8000 Installation Guide
14184630 Version 8.0, K016
September, 2015
14
1
Plug a suitable power cord into the AC power adapter.
2
Insert the AC power adapter output connector firmly into the socket on the Spectralink DECT
Server 8000 so that the retention clip snaps to the plug.
3
Plug the AC power adapter into mains.
4
If more than one AC power adapter is to be connected, the primary system power must be
connected first, the rest does not have to be done in any particular order.
5
When powering down the unit, ALL power connectors must be unplugged to ensure the unit
is completely powered off.
If more than two AC power adapters are used, these must be kept on a flat surface (same
requirements as for the Spectralink DECT Server 8000 unit). In a rack installation the power
adapters can be kept on a tray installed for the purpose provided that the ambient temperature is
below 32ºCelcius/89,6º Fahrenheit, and they have free air surrounding them.
Installing Interface Cards and CPU Cards
Before you install an interface or a CPU card ensure to take the following precautions.
Safety Precautions
Cards contain static sensitive circuitry and may be destroyed or damaged by electrostatic
discharge (ESD).
•
Make sure you re using proper ESD equipment to prevent damage to the system.
•
Fill all empty slots with blanking front plates to close the front.
To Install Interface Cards
1
With two hands, gently slide the interface card into the unit. Give it a gentle push on the last
centimeter so that it enters the backplane connector properly.
Avoid pushing on the front connectors - push only on the plastic parts at the top and bottom.
Table 6
Cable Plugs Overview
#
Nbr BIF
Cards
Redun-
dancy
SYS PWR
Primary
SYS PWR
Backup
4+ BIF PWR
Primary
4+ BIF PWR
Backup
BIF Card
Place-
ment
1
≤
4
No
Connect
No Connect
No Connect
No Connect
Slot 5-8
2
≤
4
Yes
Connect
Connect
No Connect
No Connect
Slot 5-8
3
>
4
No
Connect
No Connect
Connect
No Connect
Slot 1-8
4
>
4
Yes
Connect
Connect
Connect
Connect
Slot 1-8
Summary of Contents for DECT Server 8000
