56
System Menu
In the System Menu the following parameters can be set:
Output config:
To set the parameters for the Zone 2 /Line output.
The output Zone 2/Line provides two output options:
IR Learn
main key
►
blu ray
dvd
dvd rec
sat
tv1
Select Device
bra1
dvd
sat
tv
light
stand by
no
connection
input config
in opt1
not active
in opt2
not active
in coax1
not active
in coax2
not active
in line1
not active
in line2
not active
input config
no configuration done
all inputs not active
to configure press ok
input config
in opt1
dvd
in opt2
not active
in coax1
not active
in coax2
not active
in line1
not active
in line2
not active
dvd
sat
tv
tv
tuner
p6
Analog
stereo
<
preset
>
mode
40
dvd
sat
tv
tuner
p6
Analog
stereo
<
preset
>
modus m
/
st
89.30
01
0
40
dvd
sat
tv
tuner
p6
Analog
wide
<
preset
>
modus m
/
st
89.30
01
0
40
dvd
sat
tv
tuner
p6
PLII
surround 1
<
preset
>
modus m
/
st
89.30
01
0
40
virtuell
dvd
sat
tv
tuner
p6
PLII
surround 2
<
preset
>
modus m
/
st
89.30
01
0
40
virtuell
dvd
bra1
play
skip
skip
pause
stop
sat
red
epg
yello
blue
info
text
green
tv
/
r
tv
red
media
yello
blue
tools
info
green
sourc
lighting
power
rgb
Learn Menu
IR Learn
►
RF Learn
IR Learn
Learn
►
Clear
IR Learn
prog -
prog +
vol -
vol +
mute
IR Learn
main key
blu ray
dvd
►
dvd rec
sat
tv1
IR Learn
Learn
►
Clear
Name
IR Learn
power
ok
menu(m)
exit
left
right
IR Learn
press remote button
IR Learn
Programming successful
IR Learn
Programming failed
RF Learn
spectral bra1
new device
►
RF Learn
Plug in RF Device
press OK
RF Learn
Installation successful
RF Learn
Select Device
cla1
cta1
cta2
bra1
RF Learn
Installation failed
lighting
power
rgb
lan
g
ua
g
e
deutsch
english
contrast
75
input config
in opt1
dvd
in opt2
bd pl
in coax1
sat
in coax2
cd
in line1
tv
in line2
vcr
input config
in opt1
dvd
in opt2
not active
in coax1
not active
in coax2
not active
in line1
not active
in line2
not active
speaker set
preset
►
level trim
►
speaker distance
►
tone control
►
bass expand
bypass
room comp
►
preset save
current value
►
default value
►
exit without save
preset
preset p1
default
preset p2
default
preset p3
default
preset p4
default
preset p5
default
preset p6
default
setup
speaker setup
►
system setup
►
system set
output config
►
sub lineout
disabled
input config
►
ir learn
►
lip sync
0 ms
dynamic
full
dvd
sat
tv
tuner
p6
Analog
stereo
<
preset
>
modus m
/
st
SEEK >
01
0
40
dvd
sat
tv
tuner
p6
Analog
stereo
<
preset
>
modus m
/
st
89.30
01
00
40
IR Learn
yes
Clear Device
Are you sure ?
no
IR Learn
amp
apple tv
audio rec
beamer
blue ray
cd
IR Learn
Learn
Clear
Name
►
Zone 2:
with individually adjustable volume, to connect an active multiroom and/or wireless loudspeaker system
Line:
with firmly adjusted volume, to connect an analog recording device, etc.
Please note:
To play 5.1 multi-channel recordings (DolbyDigital or DTS) through ZONE 2/LINE OUT, „dynamic“ must be set at „comp“ in the system menu.
The „full“ position is recommended for „normal“ play back.
To play DolbyDigital/DTS signals (Bitstream) also through ZONE 2/LINE OUT, you have to choose ZONE1 (main zone) as input.
Sub output:
To activate or deactivate the subwoofer output.
The Sub output enables the connection of an active subwoofer, which needs to be activated in the system menu. With an active
sub output the internal subwoofer of the sound system is high-pass filtered at 80Hz, the external subwoofer is low-pass filtered at 80Hz.
The crossover frequency of the external subwoofer should always be set on max.
Input config:
To activate and name the 6 signal inputs (see the chapter “Initial installation”).
Here you can assign the inputs to the source devices.
IR programming:
To programme various remote operations (DVD player, TV, …, see the chapter “Learn Menu”).
Lip sync:
To synchronise the sound with time-delayed TV images.
With lip sync you can synchronise the sound and the image, for example to adjust retarded mouth movements.
Setting range of audio signal delay: 0 - 380ms
