4
Applications
72
Spectra Precision Focus 6 5" Total Station User Guide
–
If the point is new, a coordinate input screen
appears. Enter the coordinates for the point.
Press
[ENT]
after each field. When you press
[ENT]
in the CD field, the new point is stored.
–
If the specified point has a code, the code
appears in the CD field.
3.
Enter the instrument height in the HI field and
then press
[ENT]
.
The Backsight screen appears.
4.
Select an input method for defining the backsight
point.
–
To sight the backsight by entering
coordinates, see below.
–
To sight the backsight by entering the azimuth and angle, see
.
Sighting the backsight by entering coordinates
1.
To enter coordinates for the backsight point (BS),
press
[1]
or select
Coord
in the Backsight screen.
2.
Enter the point name. If the point exists in the job,
its coordinates are shown.
3.
If you intend to take a distance measurement to
the BS, enter the height of target in the HT field.
Z
Y
X0
X
Xb
Y0
Yb
Backsight point
(Xb, Yb, Zb)
Station point
(Xi, Yi, Zi)
In
strument heig
ht
Summary of Contents for Focus 6
