manualshive.com logo in svg

Spectra Logic Spectra nTier500, User Manual

Share
Download
Spectra Logic Spectra nTier500 User Manual Download Page 64

Replication

Implementing nTier Deduplication

61

Enter 

Yes

 and then 

click OK

. 

4. In the next screen, iSCSI is selected by default. Select 

Next

 to continue.

5. In the next screen, confirm the information and click 

Finish

. The target server is 

configured to be the replication target.

The 

SIR Replication

 tab appears in the right-hand pane for both servers when 

replication has been configured. Content identifies the replicator (the data 
source) and the replica (the nTier VTL appliance to which data is replicated).

Configure replication for virtual index tapes

You must enable replication for each virtual index tape (VIT) that you want to 
replicate. A virtual tape for which replication has been configured for replication is 
referred to as a 

primary virtual tape

.

•

The VIT must have 

Yes

 status (refer to 

’Virtual index tape status’

).

•

The VIT must be in a slot in a virtual tape library and cannot be in use. You 
cannot replicate a VIT that is in the virtual vault.

Note: 

If replication processes are running on the target (including creating the 

replica VIT from the FVIT), target setup fails. Re-try at a later time.

Summary of Contents for Spectra nTier500

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands