Getting Started
Implementing nTier Deduplication
14
4. Enter a name for the target or accept the default and select the IP address of the
adapter on the nTier VTL appliance. The list includes all Ethernet adapters you
have configured on the server.
5. Use the default starting LUN.
LUN IDs must start with zero.
Once the iSCSI target is created for a client, LUNs can be assigned under the
target using available virtual iSCSI devices.
6. Confirm all information and click
Finish
to show the iSCSI target in the navigation
tree.
7. A message is displayed when the iSCSI target has been created successfully.
When you close the message, a prompt asks if you want to assign a resource
(virtual tape library or drive) to the target.
Select
No
to close the prompt or
Yes
to continue with step 2 under
’Assign the
virtual tape library/drives to the iSCSI target’
. If you select
No
, refer to
’Assigning
virtual tape libraries to backup servers’
at a later time for information on
assigning virtual resources to client targets.
Assign the virtual tape library/drives to the iSCSI target
1. Expand the
SAN Clients
object until you see the target object. For iSCSI clients,
this is the object below the client name and
iSCSI.
Right-click the target object and select
Assign
.
