Getting Started
Implementing nTier Deduplication
15
2. Select the default virtual library/drives to be assigned to the target. All tape
drives in the library will be assigned to the selected client. If you want to assign
tape drives in the library individually, select the checkbox for that option.
You can assign a device (library or drive) to a target only once.
Click
Next
when you are done.
3. In the next screen, change the LUN for the resource (if necessary) to resolve
any conflict.
4. Confirm all information and click
Finish
.
Log the client onto the target
The following steps are for the Microsoft iSCSI Initiator. If you are using a different
iSCSI initiator, refer to the documentation provided by the vendor.
1. Return to the backup server. To see the iSCSI targets from the client machine,
run
Microsoft iSCSI Initiator
again or, if the application is still open, click the
Targets
tab.
If the iSCSI target assigned to the client is not listed, click
Refresh
. Assigned
iSCSI targets should now appear.
2. Select the added target and click
Log On
. If it is desirable to have a persistent
target, select
Automatically restore this connection when the system boots.
Click
OK
.
3. Click
OK
to log on to the target.
The status for the target will change from
Inactive to Connected.
The
Targets
tab lists all iSCSI targets, whether or not they are connected. To log
off a backup server from its connection, select the target, click
Details
, select the
Target Identifier
, and then click
Log Off
.
