Spectra Logic Spectra 2k Develop Manual Download Page 53

Page: 53 / 61

Chapter 15. Send Diagnostic—1Dh

The library does not return any data to the

SEND DIAGNOSTIC

command. If its self-test

completes successfully, the library returns a

GOOD

status. Otherwise, it returns a

CHECK

CONDITION

status. The sense information, available with a

REQUEST SENSE

command, indicates

a hardware failure (sense key 2h), and additional information may be returned in the
ASC and ASCQ.

Table 15-2: Send Diagnostic Command Field Values

Field Name

Field Location

Values
Allowed

Meaning

Byte

Bit

PF
Page Format

Indicates that the command parameters conform to the SCSI-2 standard.

SelfTest

Directs the library to perform its default self-test. This is the only

diagnostic option available through the

SEND DIAGNOSTIC

command.

DevOfL
Device off-
line

Permits the library to make itself unavailable while testing. The library

must be allowed to do this in order to perform the self-test.

UnitOfL
Unit off-line

Permits the library to take the drives off-line while performing the self-

test.

Parameter
List Length

03-04

All

00h

The library does not accept additional parameters for diagnostic tests.

Summary of Contents for Spectra 2k






























































Search results

Summary of Contents for Spectra 2k

Reviews:

Related manuals for Spectra 2k

Brands by name

Popular brands

Spectra Logic Spectra 2k, Develop Manual

Search results

Summary of Contents for Spectra 2k

Reviews:

Related manuals for Spectra 2k

Brands by name

Popular brands