Spectra Logic Spectra 2k Develop Manual Download Page 55

Page: 55 / 61

Chapter 16. SCSI Error Reporting

The following sense keys are not used by the library:

• 1h—Recovered error

• 3h—Medium error

• 7h—Data protect

• 8h—Blank check

• Ah—Copy aborted

• Bh—Aborted command

• Ch—Equal

• Dh—Volume overflow

• Eh—Miscompare

Sense Codes and Qualifiers

Combining the Sense Key with the Additional Sense Code (ASC) and Additional Sense
Code Qualifier (ASCQ) returned to a

REQUEST SENSE

command gives the most complete

error description available from the library. The following table describes the error
codes returned by the library.

Table 16-2: Library SCSI Error Codes

Sense Key

ASC

ASCQ

Error Description

Error Remedy or Explanation

00h

Unit Ready

No problems, no additional sense information.

Not ready

04h

00h

Unit Not Ready

The unit is not yet ready to accept commands.

04h

01h

Unit is Becoming Ready

The unit is in the process of becoming ready.

This message is displayed during initialization.

04h

83h

Door is Open, Robot

Disabled

Close Door.

This message is displayed if door has been opened.

Summary of Contents for Spectra 2k






























































Search results

Summary of Contents for Spectra 2k

Reviews:

Related manuals for Spectra 2k

Brands by name

Popular brands

Spectra Logic Spectra 2k, Develop Manual

Search results

Summary of Contents for Spectra 2k

Reviews:

Related manuals for Spectra 2k

Brands by name

Popular brands