User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
97
Apply
Select <Yes> to apply the above settings, and the following message will be
displayed.
Re-collecting data
Please wait!
When the settings cannot be applied, the following message will be displayed.
Try to reduce the resolution or FPS of the IP camera. Note that the login
account of the IP camera should have appropriate privilege.
Cannot set the IP device
Otherwise, the <Device Setup> setting is completed.
NOTE:
After changing any item under Device Setup menu, users
MUST set <Apply> to <Yes> to apply the changes, or the settings will
remain unchanged.
5.3.2.7 Activated
Access this item and select <Yes> to activate the connection to the IP camera.
To deactivate the connection, select <No>
NOTE:
Once the connection to the IP camera is activated, menu items
<Hostname/IP>, <Model>, <Connection Setup> will be grayed out and
cannot be accessed.
5.3.2.8 Status
After the connection to the IP camera is activated, users can check the
connection status. The menu will be shown as below
.
Status
1. Model
2. Resolution
3. PPS
4. Bandwidth
5. Pkg. lost rate
****
720*480
10
20 KB/Sec
0.1%
The information shown on the monitor is “ready only”.
