User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
73
Network
Restart
Network restart is required after changing network settings
. Select
<Yes> to restart the network connection. After pressing ENTER, a message
“Network restarting Please stand by” will be shown on the screen. A message
box will be displayed within 30 seconds.
Network restart…………………….….
√
UPnP NAT setting………..……..…….
X
DDNS submitted………………………
√
WAN connection………………………
√
The “
√
” symbol indicates that the device is working properly whereas the “X”
symbol indicates that the device is NOT working properly. The definitions of
the items on the message box are described below.
5.1.7.3 Modem
Setup
The
DVR-4TH/ 8TH/ 16TH
series unit can connect to the internet via an
external installed modem.
Modem Setup
1. Dial-in Setup
2. Dial-out Setup
3. Dial Port Selection
NONE
Dial-in Setup
The Dial-in function enables the user to establish dial-up modem
communication to and from the
DVR-4TH/ 8TH/ 16TH
series unit for remote
software use. The user is allowed to connect only one modem to a
DVR-4TH/
8TH/ 16TH
series unit.
For more information on dial-up setting on PC, see appendix
Dial-up
Connections via Modem
.
NOTE:
The Dial-in Service is not available if there is no modem
connected to the unit.
