User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
109
5.6.7
Event Duration
This item determines the duration of the buzzer and Alarm Out relay function
after an alarm is triggered. The available event duration range is from 5
second to 999 seconds.
5.6.8
Per Channel Config
This menu is used to set the Video Loss Detect, Motion Detect and Alarm In /
Out function for each channel. The menu is displayed as below.
Per Channel Config
1. Channel Select
2. Video Loss Detect
3. Motion Detect
4. Detection Config
5. Alarm In
6. Alarm Out
7. Digital Deterrent-Day
8. Digital Deterrent-Night
9. Digital Deterrent-Weekend
CH1
OFF
OFF
OFF
None
OFF
OFF
OFF
5.6.8.1 Channel Select
This item is used to select a desired channel for setting the parameters. Move
the cursor to <Channel Select> and press ENTER, then select a channel
using UP / DOWN keys. Press ENTER again to confirm the setting.
5.6.8.2
Video Loss Detect
This item allows the user to enable / disable Video Loss as an alarm event.
Select <ON> to enable Video Loss alarm events, <OFF> to disable. The
default setting is <OFF>.
5.6.8.3 Motion Detect
To detect motions, the users can choose from these options: <OFF>, <ALL>,
<Night & Weekend>, <Day & Weekend>, <Weekend>, <Day & Night>,
<Night>, and <Day>. The Day, Night, and Weekend is defined in section
Schedule Setup
.
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings.
