![background image](http://html1.mh-extra.com/html/speck-pumps/easyfit-1-65-thp/easyfit-1-65-thp_installation-operation-and-service-manual_1341834027.webp)
v
Table 3: Factory default schedule
Button
Duration
(In Hours)
Speed
(In RPM)
STEP 1
4
3100
STEP 2
4
2600
STEP 3
8
1600
OVERRIDE
2
3450
Schedule Tables
Use the tables below to record a personalized operating schedule.
Recording the planned schedule in the table below will make the pro-
gramming process easier and will help the user remember the custom
settings in case of inadvertent loss of schedule. The user interface will
not allow the user to program an overlap between different STEPs of the
schedule. The STEP currently being set will always take priority over
any previous settings. In the event a user attempts to program with a
combined duration greater than 24 hours, the current STEP setting will
be retained whereas the other two STEP settings will be cleared to zero
hours requiring the user to reset them. Prior to beginning the actual
programming process, it is advisable for the user to review the planned
schedule as outlined in chart form to ensure the cumulative duration is
not greater than 24 hours and no overlaps exist. It is always a good idea
to double check your programmed settings for accuracy once you have
completed the programming process.
14
Setup #1
Step 1
Step 2
Step 3
Duration
Speed