12
Schedule (SCHE) Menu
1. Enter programing mode by pressing and holding the button for at least three (3) seconds when the pump is in the
stopped (OFF) position. Once SCHE begins flashing on the LED display, press the button.
2. After entering the schedule menu, S1 (speed/power level setting 1) flashes on the LED display. Use the and buttons
to select between S1, S2, and S3. Press the button to edit the selected setting. See Figure 5.
OK
2
1
ERROR
3
OK
2
ERROR
POWER
SET
OK
0
3
2
1
S 3
ERROR
POWER
SET
OK
0
3
2
1
S 2
ERROR
POWER
SET
OK
0
3
2
1
S 1
Figure 5 - S1, S2, S3 Shown on Display
3. After selecting S1, S2, or S3 the power level for that setting flashes on the LED display. Use the and buttons to
select the desired power level (Watts). Press the button to save the power level and move on to the duration setting. See
Figure 6.
1
ERROR
3
OK
2
ERROR
POWER
SET
OK
0
3
2
1
2 0 0
ERROR
POWER
SET
OK
0
3
2
1
1 2
Figure 6 - Power Level (Watts) Setting
4. After saving the power level (watts) setting, the duration (hours) flashes on the LED display. See Figure 7. Use the and
b
buttons to select the desired duration in hours for the current setting. Press the button to save the duration and
return to the speed/power level setting selection.
5. Press the button to return to the programming menu.
1
ERROR
3
OK
2
ERROR
POWER
SET
OK
0
3
2
1
2 0 0
ERROR
POWER
SET
OK
0
3
2
1
1 2
Figure 7 - Duration (Hours) Setting
Please follow all local/state regulations regarding pool motor and timer speeds settings when choosing the
appropriate speeds.
SET
SET
Summary of Contents for 1.1 THP Dual Voltage Series
Page 27: ...27...
Page 28: ...2999999406 Rev 0717...
