Speck pumpen SUPI, Translation Of Original Operation Manual

Page: 54 / 84

Safety
12 EN 09|2017
2.9.6 Blockages in the pump
Dirt particles can clog and block the pump.
 Check how easily the pump rotates before starting it up and
after longer idle or storage periods.
2.9.7 Risk of frost
 Drain the pump/unit and pipes at risk of freezing in plenty of
time.
 Remove the pump/unit during periods of frost and store it in a
dry room.
2.9.8 Water temperature
The water temperature must not exceed 30 °C.
2.9.9 Safe use of the product
Safe use of the product is no longer guaranteed in the following
instances:
 If the pipework is not in proper condition.
 If the pump seizes.
 If protective devices are damaged or missing, e.g. protection
against accidental contact.
 If there is stress on the pump/unit or pipes during installation.