Speck pumpen BADU Star 69/12, Original Operation Manual

Page: 54 / 72

Installation
18 EN 10|2018
5 Installation
5.1 Installation site
5.1.1 Outdoor installation
 In order to increase the pump's service life, provide simple
weather protection.
5.1.2 There must be ground drainage

Calculate the size of the ground drain according to the
following criteria:
– Size of the swimming pool.
– Circulation
flow rate.
5.1.3 Ventilation and aeration
 Ensure sufficient ventilation and aeration. The ventilation and
aeration must ensure the following conditions:
– Prevention of condensation.
– Minimum
distance from fan cover to the wall: 50 mm.
– Cooling of the pump motor and other system components,
for example switch cabinets and control units.
– Limitation of the ambient temperature to maximum 40 °C.
5.1.4 Structure-borne and airborne noise transmission
 Observe regulations for structural noise protection, for
example DIN 4109.
 Install the pump in a manner which reduces structure-borne
and airborne noise transmission. Vibration-absorbing
materials are suitable bases. Examples:
– Anti-vibration
buffers
– Cork lining
– Sufficiently hard foam
5.1.5 Reserve space

Measure the reserve space so that the motor unit can be
removed in the direction of the motor fan and the suction
basket and filter unit can be removed upwards. See
dimensional drawing in the pump data sheet.
5.1.6 Fasteners
 Fasten pump using screws.