8999145EN: v1 26/02/2020
38
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
7
Removal, Storage And Disposal
Before removing the machine from the tractor a thorough check of the machine should be made.
7.1
Preparation For Storage
Thoroughly clean all moving parts, particularly the cutting unit. Check that all blades are in place and that they
are in good condition. Check all hoses for damage such as cracks, evidence of chafing and leaks. Smear all
unpainted metal parts with grease and lubricate all grease nipples. Finally, in preparation for next seasons
cutting make a note of any item that needs replacing so that parts can be ordered in good time.
7.2 Parking And Removal
In the parked position the machine is on its stands with the cutting attachment on the floor. If possible the cutting
attachment should be placed in such a way that the stands and cutting attachment form a triangle with the bulk
of the machine between them. This then forms a stable ‘tripod’ which can withstand inadvertently applied forces
during storage and better resist toppling forces. See example in Figure 7.1.
Note:
Not all machines have arm slewing capability and even some that do are restricted in parking capability
due to attachments or forward reach arms. However, it is good practice when parking-up the machine for any
length of time to make best use of the cutting attachment placement on the ground to enhance the stability of the
stands.
The following guidelines should be used when parking-up the machine at the end of the season;
Figure 7.1
Figure 7.2.1.3
– Legs Mounted
