GB
46
ceramics
• Improper handling and/or use
• Lack of maintenance
• Incorrect installation or appliance connection
• Failure to comply with installation instructions and operating instructions
• Technical modifications made to the appliance by staff from other companies
8.6 ELIMINATION OF DEFECTS / REPAIR
Independent of any statutory provisions acknowledged as taking precedence
over the terms of this warranty, all necessary repair works resulting from mate-
rial or manufacturing defect shall be carried out free-of-charge and shall not
invalidate the remaining provisions of the warranty. Within the scope of this
warranty promise, Spartherm Feuerungstechnik GmbH reserves the right to
either remedy the fault or replace the device free of charge. The elimination of
defects shall take precedence.
The terms of this warranty shall not extend to any damage or compensation not
covered by statutory provisions.
8.7 EXTENSION TO THE WARRANTY PERIOD
The warranty period shall automatically be extended, where claims made in
respect of these warranty provisions result in the repair or replacement of defec-
tive equipment.
8.8 SPARE PARTS
Only the manufacturer's own components, or replacement parts recommended
and approved by the manufacturer, shall be used for appliance servicing and
repair.
8.9 LIABILITY
Damages and claims for compensation which are not the result of delivery of a
defective appliance from Spartherm Feuerungstechnik GmbH are excluded and
are not part of this warranty promise.
The above shall not include claims made in respect of statutory legal
requirements.
8.10 CLOSING REMARKS
In addition to these warranty conditions and our commitment to them, our
dealers and contractual partners are pledged to assist you in both word and
deed. We expressly recommend that our fireplaces and stoves are regularly
inspected by a qualified technician.
9. TECHNICAL DATA
STOVE WITH WATER-SIDE CONNECTIONS
The water-side connections are at the back, in the bottom area.
*The specified values represent the mean value over a combustion. These
values occur under test conditions when
approx. 2.2 kg
of wood logs are
burnt per hour.
