E
ng
lis
h
9
2.3
Regenerative braking (KERS) (see figure 4)
BIKE all in one features a regenerative braking function; this al-
lows you to slow down the bicycle using the electric motor as a
generator recharging the batteries thanks to the integrated Kinetic
Energy Reccuperation System (KERS). In order to activate the
regenerative braking you need to pedal backwards. As soon as you
stop pedalling, the motor will stop braking.
NOTE
: when the charger get disconnected from the bike,
BIKE all in one will turn off.
CAUTION
: Regenerative braking DOES NOT substitute
safety mechanical brakes. Please do NOT remove the me-
chanical brakes from your bike.
Figure 4: motor assistance and regenerative braking
2.4
Charging BIKE all in one (see Figure 5)
To charge BIKE all in one, simply remove the protection cap from
the charging connector (I) and plug in the Zehus charger (2). Then
connect the Zehus charger to a power outlet (110~240 V).
The charging time is approximately 3 hours for a complete charge.
While BIKE all in one is charging the charger LED must turn RED.
When BIKE all in one is completely charged, the charger LED turns
GREEN (3).
CAUTION
: Regenerative braking WILL NOT BE AVAILABLE
when your BIKE all in one is fully charged.
Summary of Contents for Zehus
