Sparta Zehus, User Manual

Page: 33 / 55

E
ng
lis
h
6
1. Getting started with BIKE all in
one
1.1 Intended use
BIKE all in one is intended to be used exclusively with the bike
which was sold with. Any attempt to mount BIKE all in one on
another bike will void warranty claims.
BIKE all in one is not permitted for competition and race use.
1.2 Initial operation
BIKE all in one can only be activated when the battery state of
charge is sufficient. In order to check the battery state of charge of
your BIKE all in one please refer to 4.1.
1.3 Turning on the system
BIKE all in one turns on automatically when the rear wheel reaches
a speed higher than 5 km/h. Thus, to turn on BIKE all in one just
start pedaling your bike as usual or spin the wheel while you lift
the bike, as explained in Figure 2.
Figure 2: in order to turn on BIKE all in one, lift the bike (1), push
the pedal (2) such that the rear wheel reaches at least 5 km/h (3).