User’s Manual
70
Click ‘Add’ button to add the MAC address and associated comment to the MAC address
filtering table.
Reset:
Remove all inputted values.
MAC Filtering Table:
All existing MAC addresses in filtering table will be listed here.
Delete Selected:
If you want to delete a specific MAC address entry, check the ‘select’ box of the MAC
address you want to delete, then click ‘Delete Selected’ button. (You can select more than
one MAC addresses).
Delete All:
If you want to delete all MAC addresses listed here, please click ‘Delete All’ button.
Reset:
You can also click ‘Reset’ button to unselect all MAC addresses.
Enable IP Filtering Table:
Check this box to enable IP address based filtering, and please select ‘Deny’ or ‘Allow’ to
decide the behavior of IP filtering table. If you select deny, all IP addresses listed in filtering
table will be denied from connecting to the network; if you select allow, only IP addresses
listed in filtering table will be able to connect to the network, and rejecting all other network
devices.
IP Filtering Table:
All existing IP addresses in filtering table will be listed here.
Add PC:
Click this button to add a new IP address to IP filtering table, up to 20 IP addresses can be
added.
Please refer to section ‘Add PC’ below.
Delete
Selected:
If you want to delete a specific IP address entry, check the ‘select’ box of the IP address
you want to delete, then click ‘Delete Selected’ button. (You can select more than one IP
addresses).
Delete All:
If you want to delete all IP addresses listed here, please click ‘Delete All’ button.
After you finish with all settings, please click ‘Apply’ button and the following message will
be displayed on your web browser:
