User’s Manual
62
Type:
Select the type of connection, TCP or UDP. If you’re not sure, please select ‘Both’.
Port Range:
Input the starting port number in the left field, and input the ending port number in the right
field. If you only want to redirect a single port number, just fill the port number in the left
field.
Comment:
Please input any text to describe this mapping, up to 16 alphanumerical characters.
Add:
Add the mapping to port forwarding table.
Reset:
Remove all inputted values.
Port Forwarding Table:
All existing port forwarding mappings will be displayed here.
Delete Selected:
Please select a port forwarding mapping by clicking the ‘Select’ box of the mapping, then
click ‘Delete Selected’ button to remove the mapping. If there’s no existing mapping, this
button will be grayed out.
Delete All:
Delete all mappings existed in virtual server table.
Reset:
Unselect all mappings.
After you finish with all settings, please click ‘Apply’ button and the following message will
be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while router is rebooting).
