User’s Manual
63
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.
Virtual Server
This function allows you to redirect a port on Internet IP address (on WAN port) to a
specified port of an IP address on local network, so you can setup an Internet service on
the computer on local network, without exposing it on Internet directly. You can also build
many sets of port redirection, to provide many different Internet services on different local
computers via a single Internet IP address.
Please click ‘NAT’ menu on the left of web management interface, then click ‘Virtual Server’,
and the following message will be displayed on your web browser:
Enable Virtual Server:
Check this box to enable virtual server, and uncheck this box to disable virtual server.
Private IP:
Input the IP address of the computer which provides Internet service.
Computer Name:
Pull down the menu and all the computers connected to the router will be listed here. You
can easily to select the computer name without checking the IP address of the computer.
Private Port:
Input the port number of the IP address which provides Internet service.
Type:
Select the type of connection, TCP or UDP. If you’re not sure, please select ‘Both’.
Public Port:
Please select the port number of Internet IP address which will be redirected to the port
number of local IP address defined above.
