User’s Manual
64
Comment:
Please input any text to describe this mapping, up to 16 alphanumerical characters.
Add:
Add the mapping to virtual server table.
Reset:
Remove all inputted values.
Virtual Server Table:
All existing virtual server mappings will be displayed here.
Delete
Selected:
Please select a virtual server mapping by clicking the ‘Select’ box of the mapping, then
click ‘Delete Selected’ button to remove the mapping. If there’s no existing mapping, this
button will be grayed out.
Delete All:
Delete all mappings existed in virtual server table.
Reset:
Unselect all mappings.
After you finish with all settings, please click ‘Apply’ button and the following message will
be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.
Port Mapping for Special Applications:
Some applications require more than one connection a time; these applications won’t work
with simple NAT rules. In order to make these applications work, you can use this function
to let these applications work.
