manualshive.com logo in svg

Sparklan WRTR-168G, User Manual

Share
Download
Sparklan WRTR-168G User Manual Download Page 12

 

 

 

          

 

                                                                                                                                                     
                                                                                                                                             

                                                              

User’s Manual  

12

4.1 Quick Setup 

 

 

 

 

Please go to Quick Setup menu by clicking ‘Quick Setup’ button. 

 

 

 

Most users will be able to configure the AP Router and get it working properly using the 

settings on this screen. Some Internet Service Providers (ISPs) will require that you enter 

broadband specific information into this device, such as User Name, Password, IP Address, 

Default Gateway Address, or DNS IP Address for Internet access. This information can be 

obtained from your ISP, if required. 

And the following message will be displayed: 
 
 
 
 

MAKE CORRECT NETWORK SETTINGS OF YOUR COMPUTER 

To change the configuration, use Internet Explorer (IE) or Netscape Communicator to connect 
the WEB management 

192.168.2.1

. 

Summary of Contents for WRTR-168G




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands