3
1. SmartLink Module
The SmartLink WiFi module and SpaLink App lets you use an Apple® or Android™
smartphone or tablet as a wireless remote control for your SV Series equipped spa. Using
simple touch screen menus, you can control all spa accessories including pumps, air
blowers and LED spa lights. You can also configure your spa including adjustment of the
temperature, selecting your desired heating mode, programming filtration, sleep or power
save timers and more. Available anywhere, anytime, just as if you were standing in front of
the spa, or better yet, sitting in it.
For a smooth and successful setup process you must complete each installation section
and steps in their correct order:
1.
WiFi Internet Access
2.
Install the SpaLink App
3.
Register a User Account
4.
SpaLink App setup process
1.1 Product Overview
Indicator LEDs
Front Cover Clip
Cover Screw
A = Associated
D = Data Transfer
C = Connection
External View
SP
ANET
SV
-WIFI
c
LOOP
Data Port to
connect to
SV Spa Control
WiFi Antenna
Mounting Screw
Hole
Mounting Screw
Hole
Loop Data Port
for accessories
Waterproof
Cable Clamp
Data cable to
EXP1 socket on
SV Spa Control
Internal View
1.2 Hardware Requirements
Your SpaNET SV Series spa control must be fitted with the SV SmartLink WiFi module for
the app to work. The SmartLink WiFi module requires a permanent active internet
connection via a wireless router to operate. The Internet connection/router must remain
powered on at all times for you to use the SpaLink App.
