91369 Service Manual
2-23
Setup
Note:
Selecting
SAVE
when the currently entered value for Region is not valid displays the “Cannot switch Radio
ON with invalid region” error dialog box. Selecting
OK
toggles
RADIO ON/OFF
to
OFF
, disabling the radio.
Outbound Parameters (default = 5)
This input cell displays this monitor’s configuration setting for the number of parameters that are displayed in
bed selection dialog boxes. Valid values range from 0 through 6 (default = 5), with blank equating to 0.
MAC Address
The radio’s assigned MAC address (in hexadecimal) displays below this label.
DNS Server Address and DNS Default Domain
The radio’s DHCP server-assigned DNS server address (in IP format) and DNS default domain name (in text)
display below these labels, but only when
Wireless DHCP
is selected.
WLAN IP Address (default = 0.0.0.0)
Allows the operator to specify the IP address for the wireless network interface, when
Wireless DHCP
is not
selected.
WLAN Subnet Mask (default = 0.0.0.0)
Allows the operator to identify which parts of the wireless IP address to use for TCP/IP subnet determination,
when
Wireless DHCP
is not selected. Wireless subnet mask is not related to the Monitoring network’s subnet
name or subnet mask.
Gateway Address (default = 0.0.0.0)
Allows the operator to specify the IP address of a wireless TCP/IP gateway (bridge or router) through which
wireless communication to other devices should flow, when
Wireless DHCP
is not selected. The Gateway
address on the WLAN tab is not related to the Gateway address on the TCP/IP tab.
3
2412 to 2472 MHz
Japan (MKK)
4
2457 to 2462 and 2484 MHz
Japan
5
2412 to 2472 MHz
France
6
2457 to 2462 MHz
Spain
Table 6: Region Codes
Value
Center Frequency Range
Region
