SP 313DNw V, Setup Manual, Page: 34 / 40

3
Check and enter [Contract ID], [Authentication Key], and [PaaS URL].
Registration Configurations
Item Description
Contract ID* Enter your Contract ID. Enter this only when you have selected Contract Registration for [Operation]
above.
Authentication Key* Enter your Authentication Key. Enter this only when you have selected Contract Registration for
[Operation] above.
PaaS URL If no PaaS URL is specified, enter your PaaS URL. Enter this only when you have selected Contract
Registration for [Operation] above.
* The sales dealer you have made a contract with will provide you with your Contract ID and Authentication Key. Address any inquiries to the
sales dealer.
After making the entries, click [OK].
If the message "Operation Successful" appears, authentication is complete. For other messages, check the following
table:
Messages
Message Description
Registration Configuration is not correct The Contract ID or Authentication Key you have entered is either wrong or already used. Check that
the entered Contract ID or Authentication Key is correct.
Operation failed, please contact service
center (Code:xxx)
Please contact the service center.