manualshive.com logo in svg

SP 313DNw V, Setup Manual, Page: 27 / 40

Share
Download
SP 313DNw V Setup Manual Download Page 27

Manual Configuration (DHCP Disabled)

 On the [Start] menu, click [All Programs].
 Click [Smart Organizing Monitor].
 Click [Smart Organizing Monitor Status].
 Click the [User Tools] tab.
 Click [Click Printer Configuration].
 Enter the access code, and then click [OK].

The default access code is "Admin". Enter "Admin" if it has not been changed. Case is significant.

 Click the [IPv6] tab.
 Select [Disable] in [IPv6 DHCP:].
 Enter values in [Manual address:], [Prefix length:], and [Gateway:], and then click [OK].
 Click [OK] when the dialog appear on the screen.
 Turn off the machine.
 Connect the machine to the router or the hub using the Ethernet cable.
 Turn on the machine.
 Click [Connect Printer].
 Click [Search Network Printer].

A list of printers currently connecting to the network appears.

 Select your printer, and then click [OK].
 If the printer information appears after a while, the connection is established successfully.

If nothing appears on the screen in about two minutes, repeat this procedure.

 The network settings are complete.

If it is necessary to specify the subnet mask, gateway, DNS server, or proxy server, see page  "How to Specify the Subnet, Gate-
way, DNS Server, and Proxy Server".

•

Summary of Contents for 313DNw V









































Reviews:

No comments