SP 313DNw V, Setup Manual, Page: 19 / 40

Click the [Wireless] tab.
CVW908
Select [Manual Setup] for [Configuration Method].
CVW909
Refer to "Connecting to the devices using WPA2-PSK or Mixed WPA2/WPA authentication" or "Connecting to the de-
vices using Open System or Shared Key authentication" described below to configure the wireless LAN setting.
Connecting to the devices using WPA2-PSK or Mixed WPA2/WPA authentication
CVW911
1. Enter the SSID.
2. Select [Infrastructure].
3. Select [WPA2-PSK] or [Mixed WPA2/WPA].
4. Select [CCMP(AES)].
5. Enter the WPA Passphrase.
In Mixed WPA/WPA, the authentication method and encryption method are determined according to the connected wireless
LAN router or access point. Select Mixed WPA/WPA when the connected device’s authentication method is WPA-PSK or
TKIP is used as an encryption method.
Connecting to the devices using Open System or Shared Key authentication
CVW912
1. Enter the SSID.
2. Select [Infrastructure].
3. Select [Open System] or [Shared Key].
4. Select [WEP].
Do not select [None] except in special cirmunstances.
If selected, the security system will not work.
5. Select [64 bit] or [128 bit].
6. When you register multiple encryption keys,
Select a registration number between [#] and [#].
7. Select [Hexadecimal] or [ASCII].
8. Enter the WEP key.
Click [Apply], and then click [OK].

•
